Suspected moisture, a cold wall or an unexplained temperature change? Rose City Pros 24/7 Plumbing & Home Services uses thermal imaging to guide a closer look—then explains what the findings mean and what to check next.
Targeted investigationClear explanationsRespect for your home
A useful tool. An informed assessment.
What is residential thermal imaging?
A thermal camera displays differences in surface temperature across accessible parts of your home. Those patterns can provide clues about heat transfer, possible moisture-related changes and other conditions that deserve investigation.
Rose City Pros combines thermal imaging with visual inspection, hands-on experience and moisture-meter verification where appropriate. We look at the pattern in context, explain what is supported by the findings and discuss any additional checks needed.
What to expect
Start with your concern.Share what you noticed, when it began and any relevant leak or repair history. We discuss scope, access, timing and pricing.
Inspect and verify.Scan accessible surfaces, review visible conditions and use moisture-meter checks where appropriate.
Understand your options.Review what we found, what remains uncertain and the practical next steps. Additional testing and repairs are discussed separately.
Where thermal imaging can help
Focus the investigation.
Each concern starts with a conversation. The camera helps identify areas worth checking when conditions create a detectable surface-temperature difference.
01
Hidden moisture & water intrusion
Water stains, a damp area or a recurring concern may justify a closer look. Thermal patterns can help identify surfaces to investigate, with moisture-meter checks where appropriate. A cold patch alone does not confirm moisture.
02
Heat loss & insulation deficiencies
Temperature differences across walls and ceilings can suggest uneven insulation or heat transfer. We interpret those patterns in context; a thermal scan does not measure the insulation inside a wall or guarantee energy savings.
03
Drafts around windows & doors
Cooler or warmer surface patterns around openings can help focus checks of seals, weatherstripping and possible air leakage. Weather and indoor–outdoor temperature differences affect the result.
04
Plumbing investigations
When a suspected leak changes a surface temperature, thermal imaging can help narrow the search. We combine that information with plumbing experience and other checks rather than assume the image identifies the source.
05
Water-damage & restoration investigations
After a leak or flooding, a thermal scan can help guide moisture checks and focus attention on affected areas. Moisture readings and other observations are needed to assess drying; an image alone does not prove a material is dry.
06
Heating & cooling irregularities
Uneven room temperatures or unusual patterns near accessible heating and cooling areas can guide further investigation. Findings may call for a qualified HVAC assessment and do not replace equipment testing.
07
Potential electrical hot spots
An unusual warm area near accessible electrical equipment may warrant attention. Temperature alone does not diagnose an electrical fault. We recommend evaluation by a qualified electrical professional; this service does not certify electrical safety.
Clear expectations
What thermal imaging can and cannot do
What it can do
Show surface-temperature patterns, highlight differences worth investigating and help target appropriate follow-up checks. It may reduce unnecessary opening of walls and ceilings by narrowing the area of concern.
What it cannot do
See through walls, directly detect water or mold, identify every leak, or prove that a concealed area is problem-free. It cannot confirm an electrical fault or establish that a home is safe from electrical hazards.
A thermal image is one part of the assessment. Weather, sunlight, heating and cooling operation, surface materials and access affect the result. Some problems leave no useful pattern, and further testing or physical access may still be necessary.
Use the camera alongside visual inspection and practical experience to focus follow-up checks where they can be most useful.
Understand your home
We explain what the image shows, what it does not establish and why another check may be needed. You can make an informed decision.
Respect the space
Start with a non-invasive scan and avoid unnecessary demolition where possible. We discuss any need for further access before proceeding.
Connect the next step
When the findings point toward plumbing, restoration or a home repair, we discuss relevant options. Electrical and HVAC concerns may require qualified specialists.
A separate test for indoor air
Radon testing and its benefits
Radon is an invisible, odourless radioactive gas that can enter a home from the ground and accumulate indoors. Long-term exposure increases the risk of lung cancer. Testing is the only way to know the radon level in your home.
Measure what you cannot see
A dedicated radon test measures radon in indoor air. A thermal imaging camera shows surface-temperature differences and cannot detect radon. These are separate assessments with different purposes.
Make an informed decision
A long-term test helps establish whether action to reduce radon is needed. If levels are elevated, discuss appropriate next steps with a qualified radon professional. Testing measures exposure; it does not remove radon.
Allow time for a useful result
Health Canada recommends a long-term test lasting at least three months. Radon levels vary over time, so a brief reading cannot replace the recommended long-term test.
Understand both assessments
Thermal imaging can help focus investigations of heat loss, drafts or suspected moisture-related temperature changes. Radon testing addresses a separate indoor-air concern. Together, the information can help you decide which improvements or further checks your home needs.
No. A thermal camera detects surface-temperature patterns. Conditions inside a wall may affect its surface temperature, but the camera cannot see pipes, insulation or other objects through the wall.
Can a thermal camera detect water or mold?
It does not directly detect water or mold. A temperature pattern can suggest an area worth checking. Rose City Pros uses visual inspection and moisture-meter verification where appropriate; mold assessment requires separate evaluation.
Can thermal imaging help investigate a plumbing leak?
It can help narrow down an area when a leak creates a detectable temperature difference at an accessible surface. Some leaks will not show a useful thermal pattern, so further plumbing investigation may be needed.
Will you need to open my walls or ceilings?
The initial thermal scan is non-invasive. It may help target further investigation and avoid unnecessary demolition where possible. Confirming a cause or completing repairs can still require access; we discuss the next step with you first.
Does weather affect the inspection?
Yes. Indoor and outdoor temperature differences, sunlight, wind, recent rainfall, heating and cooling operation, surface materials and access can affect what is visible. We discuss suitable timing and preparation for your concern.
Is this an electrical inspection or a complete home inspection?
No. This is a targeted investigation of the concerns discussed with you. Unusual electrical hot spots should be evaluated by a qualified electrical professional. Thermal imaging does not certify electrical safety or replace a complete home inspection.
What does a thermal imaging inspection cost?
Call 226-280-7790 or request an inspection to discuss your address and concerns. We explain the proposed scope and pricing before proceeding. Additional testing and repairs are discussed separately.
Where do you offer thermal imaging?
Rose City Pros serves homeowners in Windsor and Essex County. Contact us to confirm availability for your address and arrange a suitable inspection time.
Can a thermal imaging camera detect radon?
No. A thermal camera shows surface-temperature differences. Radon requires a separate test designed to measure the gas in indoor air. Health Canada recommends a long-term radon test lasting at least three months.
